186264 C22-WS3-MS1-K02-P62

Delivery program

Product range
RMQ compact solution
Basic function
Key-operated buttons
Single unit/Complete unit
Complete unit
momentary
Function: [ = spring-return]
40° 40°
Connection type
Cable (black) with non-terminated end, 4 pole
Cable Length
1 m
Not suitable for master key systems
3 positions
Lock mechanism
MS1
Key withdrawable in position
0
Degree of Protection
IP66 (front)
IP65 (on rear)
Front ring
Bezel: titanium
Connection to SmartWire-DT
no
Contacts
N/C = Normally closed
2 NC
Notes
= safety function, by positive opening to IEC/EN 60947-5-1
Actuator travel and actuation force as per DIN EN 60947-5-1, K.5.4.1
[mm]
4.65
Maximum travel [mm]
5.7
Minimum force for positive opening [ N]
30
Contact sequence
1160SWI-71
Contact travel■ = Contact closed□ = Contact open
Contact diagram
1160DIA-14
Positive opening (ZW)
yes
Information about equipment supplied
With 1 key

Technical data

General
Standards
IEC/EN 60947-5-1
VDE 0660
Certifications
CE, UL, CSA
Operating frequency [Operations/h]
≦ 100
Operating torque
≦ 0.5 Nm
Tightening torque Threaded ring
2 Nm
Climatic proofing
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Degree of Protection
IP66 (front)
IP65 (on rear)
Ambient temperatureOpen
-30 - +70 °C
Ambient temperatureStorage
- 30 - + 80 °C
Mounting position
As required
Mechanical shock resistance, shock duration 11 ms
> 30 g
Contacts
Rated impulse withstand voltage [Uimp]
800 V AC
Rated insulation voltage [Ui ]
30 V
Overvoltage category/pollution degree
III/3
Control circuit reliabilityAt 17 V DC/7 mA [HF ]
N/C contact: statistically determined 1 failure per 0.9 × 106 Operations
Max. short-circuit protective deviceFuse [gG/gL]
4 A
Rated conditional short-circuit current [Iq]
1 kA
Switching capacity
Rated operational current [Ie ]AC-1524 V [Ie ]
4 A
Rated operational current [Ie ]DC-13 24 V [Ie ]
3 A
Cable characteristicsDesign
Cable end open
Cable characteristicsCable Length
1 m
Cable characteristicsMaterial characteristic
PUR
Cable characteristicsDiameter [⌀]
4.7 mm

Design verification as per IEC/EN 61439

Operating ambient temperature min.
-30 °C
Operating ambient temperature max.
+70 °C

Technical data ETIM 7.0

Low-voltage industrial components (EG000017) / Selector switch, complete (EC001029)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Selector switch, complete unit (ecl@ss10.0.1-27-37-12-43 [ACN984011])
Number of switch positions
3
Type of control element
Key
Suitable for illumination
No
With light source
No
Colour button
Black
Hole diameter
22 mm
Width opening
0 mm
Height opening
0 mm
Switching function latching
No
Spring-return
Yes
Degree of protection (IP)
Other
Degree of protection (NEMA)
Other
Supply voltage
0 - 0 V
Number of contacts as normally open contact
0
Number of contacts as normally closed contact
2
Number of contacts as change-over contact
0
Type of electric connection
Other
With front ring
Yes
Material front ring
Plastic
Colour front ring
Other

Dimensions

1160DIM-147